|本期目录/Table of Contents|

[1]曾文瑜,邹 昊.机器视觉检测定位与非接触寻找焊缝的实现[J].温州职业技术学院学报,2020,01:59-61,81.
 ZENG Wenyu,ZOU Hao.Realization of Machine Vision Detection Positioning and Non-contact Weld Seam Search[J].Journal of Wenzhou Vocational and Technical College,2020,01:59-61,81.
点击复制

机器视觉检测定位与非接触寻找焊缝的实现(PDF)

《温州职业技术学院学报》[ISSN:1006-6977/CN:61-1281/TN]

期数:
2020年01期
页码:
59-61,81
栏目:
应用技术
出版日期:
2020-06-05

文章信息/Info

Title:
Realization of Machine Vision Detection Positioning and Non-contact Weld Seam Search
文章编号:
1671-4326 (2020) 01-0059-03
作者:
曾文瑜邹 昊
(九江职业大学 机电工程学院,江西 九江 332000)
Author(s):
ZENG Wenyu ZOU Hao
(School of Mechanical and Electrical Engineering, Jiujiang Vocational University, Jiujiang, 332000, China)
关键词:
机器视觉检测定位焊接非接触焊缝
Keywords:
Detection of machine vision Detection positioning Non-contact Weld seam
分类号:
TG409
DOI:
10.13669/j.cnki.33-1276/z.2020.011
文献标识码:
A
摘要:
目前企业大多采用色差传感器或角度位移传感器定位焊接食品罐马口铁,往往出现探测系统灵敏度 不高、感应信号滞后等缺陷,严重影响产品质量。基于机器视觉检测的非接触式焊缝定位方案,设计一种包括机器 视觉检测装置、焊缝追踪信号处理机构和焊缝定位信号执行机构在内的焊缝自动追踪系统,应用于食品罐马口铁焊 缝的寻找,与传统的焊缝定位技术相比,提高了产品质量稳定性,有效保证了罐身制造产品的品质。
Abstract:
At present, most enterprises apply color difference sensor or angle displacement sensor to locate and weld tinplate of food cans. Such methods often have the defects of low sensitivity of the detection system and induction signal lag, which severely affect product quality. In this paper, an automatic weld seam tracking was designed based on a non-contact weld seam positioning scheme of machine vision detection, including a machine vision detection device a weld seam tracking signal processing mechanism and a weld seam positioning signal execution mechanism. The system was applied to search tinplate weld seam in food cans. Compared with the traditional weld positioning technology, this system improves the quality stability of products and effectively ensures the quality of canned products.

参考文献/References

[1] 苏玉,卢印举.基于磁敏角度技术的拉线式位移传感器的设计与应用[J].现代电子技术,2010(15):37-43.
[2] 陈卫.基于光学色差传感器的表面粗糙度测量[J].仪表技术与传感器,2006(10):51-56.
[3] 谢宁宁.平面电容式无损探测传感器的研究[D].成都:西南交通大学物理科学与技术学院,2012:122.
[4] 梁胜.一种无接触电容式角度传感器的设计[C]//韦杰,吴乐桂.第二届长三角地区传感技术学术交流会论文集,杭州:2006:47.
[5] 张铮,王艳平,薛桂香.数字图像处理与机器视觉[M].北京:人民邮电出版社,2017:27.

备注/Memo

备注/Memo:
[收稿日期] 2019-08-13 [基金项目] 江西省教育厅科学技术研究项目(GJJ181202) [作者简介]曾文瑜(1973—),女,贵州平坝人,教授,工程硕士,主要从事机电一体化技术研究研究; 邹 昊(1985—),男,汉族,江西九江人,讲师,主要从事工业自动化研究.
更新日期/Last Update: 2020-06-05